Filter Tips
Pipet Tips
Gel Loading Tips & Pipettors
PCR Tubes & Plates
Centrifuge Tubes
Rack Systems
Cryoproducts
Autoradiography
DNA Workstation Hybridi-
sation Documentation
Electrophoresis
Dry Block Heat & Water Bath
Table- and Mini-Centrifuges
Rotator, Vortexer & Shaker
Nylon Wool & PAP PEN
Microparticles
|
 Print version
| Microtiter plate-Thermo-Shaker |
This unique Microplate shaker combines Shaking and Heating. It can either shake or heat or shake/heat at same time two/four microplates. It provides shaking action 250 - 1.200 rpm / 2 mm amplitude. The heat is transfered to the sample from the platform and the heated lid. This heating from both sides guarantees a very good temperature stability at low evaporation. The temperature can be regulated from 25 °C or RT up to 60°C.
All electronical functions including the 96 hour timer are microprocessor controled.
L079: weight 6,2 kg, dimension 270 x 260 x 125mm (W x D x H)
L079-4:weight 9 kg, dimension 380 x 390 x 140mm (W x D x H)
low voltage external power supply 12 volt, 4.16A |  |
| Cat.# | Description | | Price [USD] |
| L079 | Shaker/Heater for | 2 MTP`s | 1,445.00 |
| L079-4 | Shaker/Heater for | 4 MTP`s | 1,958.00 |
| Thermo- Shaker für Mikro- oder Deep-Well-Platten |
V 2000 is a unique micro processor controlled shaker incubator for up to four microtitre plates. The three parameters, speed, temperature and time are programmed via the control panel. Count down remaining time as well as the other two parameters are displayed on the LCD. The plates remain visible to the user at all times under the clear protection cover. For added safety V 2000 is the only incubator on the market to work from a low voltage supply.
V 2000 is available for all plate heights on request
* Easy access to all four plates at all times for loading and unloading
* Uniform heating via air circulation
* Unique open construction for easy integration with robotic systems
* Remote low voltage supply for your safety
* Automatically adjusts to all voltage supplies from 100V to 240V
* Minimum bench space required
* Easy to clean and maintain
* upgradeable for deep well plates
* Optimal temperature uniformity of plates
Specificationes:Temperature range 5°C over RT to 45°C - uniformity +/- 1°C
speed 500-1.300 rpm in 10 rpm steps, 3 mm orbit
operational conditions 12°C to 30°C
weight 4,2 kg, dimensions 200 x 520 x 220 mm (W x D x H)
Remote power supply 24V, 5.4A |  |
| Kat.# | Beschreibung | | Price [USD] |
| L092 | Thermo- Shaker | 4 Microtestplates | 2,565.00 |
| L092-DW | Thermo- Shaker | 4 Deep-Well-Plates | 2,565.00 |
| Microplate Washer S200 |
This microplate washer is the most user friendly manual washer on the market. The user can choose to process the plate either in ist storage position- on top of the pump unit or, down on the labtop surface. The unit provides a quiet and reliable operation in a compact format, accurate dispensing and low residual volumes, adjustable dispense pressure and aspirate force. Further features are
filtered pump inlet and silenced outlet
fully autoclavable, metal free fluid path
colour coding for easy maintenance and system modularity
extremly easy to clean, small footprint, compact in storage
8 or 12 way wash heads, optional aspirate probes and fill manifolds
12V DC remote power supply for piece of mind and added safety.
A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, power supply and all tubing. Single modules are available for customers, who have already a vacuum pump.
Specifications: operating voltage/Hz 100-240V 50-0 Hz, max. current requirement 9.6VA, weight 4 kg, dimensions complete system 250x370x33 mm (WxDxH) |  |
| Cat.# | Description | Price [USD] |
| L072 | 8-channel washer complete | 1,911.00 |
| L073 | 12-channel washer complete | 1,970.00 |
| L072-8MCT | 8-way manifold + carrier + tubing | 598.50 |
| L073-12MCT | 12-way manifold + carrier + tubing | 658.00 |
| L072-8MCR | 8-way manifold + carrier + reservoir kit | 717.50 |
| L073-12MCR | 12-way manifold + carrier + reservoir kit | 777.00 |
| L072-8M | 8-way manifold | 360.50 |
| L073-12M | 12-way manifold | 392.00 |
| Microplate Washer A1000 |
This microplate washer A1000 is a unique processor for the fully automated washing and filling of both, 96 and 384 well microplates, including deep well format. It is designed to achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing the user a multitude of individual adjustment possibilities.
The unit provides:
* accurate dispensing and low residual volumes
* up to two wash reagents, each with its own fluid pathways
* unique open construction for easy integration with robotic systems
* Plate sweep for lowest residual volumes
* Up to 30 user prgramable wash protocols
optical liquid level sensing in all reservoirs with visual warning system
* extremly easy to clean and maintain
heads available in 8 and 12 way
* External USB-port or RS232 port ensures robotic integration
12V DC remote power supply for piece of mind and added safety
technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 300 microliter, residual volume 3 microliter per well typical action or 1 microliter per well with sweep, dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, wheight 9,2 kg, dimension 650x650x350 mm WxDxH. |  |
| Cat.# | Description | Price [USD] |
| L075-8 | 8-channel washer A1000 | 4,200.00 |
| L075-12 | 12-channel washer A1000 | 4,532.00 |
| L075-Wash-S | Wash -Level-Sensor | 120.00 |
| L075-Waste-S | Waste -Level-Sensor | 120.00 |
| L075-AC | Aerosol Cover | 695.00 |
| L075-RP | Add. Reagent pump | 695.00 |
| L075-384 | Wash head 384 Step | 360.50 |
| Microplate Filler A500 |
This microplate filler A500 is a unique processor for the fully automated filling of both, 96 and 384 well microplates of all possible formats. It is designed to achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing the user a multitude of individual adjustment possibilities.
The unit provides:
* accurate dispensing precision
* up to 16 different, each with its own fluid pathways
* unique open construction for easy integration with robotic systems
* Up to 25 user prgramable wash protocols
optical liquid level sensing in all reservoirs with visual warning system
* extremly easy to clean and maintain
* RS232 port ensures robotic integration
* remote control PC software available
technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 300 microliter, residual volume 3 microliter per well typical action or 1 microliter per well with sweep, precision CV = +/- 3% 300µl, dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, wheight 6 kg, dimension 650x650x350mm WxDxH. |  |
| Cat.# | Description | Price [USD] |
| L093-8 | 8-channel filler | 7,168.00 |
| L093-16 | 16-channel filler (96 and 384 well plates) | 9,980.00 |
| Microplate-Shake for two or four Plates |
This small, compact unit provides shaking of two or four microplates for immuno assays and agglitunation test
needs small footprint only, dimension 220x205x90 mm (wxdxh)
rotating shaking with speed of 150-1.000 rpm, orbit 2 mm, digital speed display:choosed-actual
timer 0-24 hours with auto stopp
working temperature +4°C to +45°C
Power supply 12Volt 500 mA, 110-230 Volt, 50/60 Hz |  |
| Cat.# | Description | Price [USD] |
| L086 | microplate shaker for 2 plates | 475.00 |
| L086-A4 | platform for 4 MTP´s | 55.00 |
| Orbis "Personal Plate Shaker" |
New, the small handy microplate shaker for reliable efficient and long life operation. Minimal footprint, dimensions 93x133x87mm (WxDxH). Open Construction for easy integration with robotic systems. Accomodates all styles of microplates. Momentary shaking action, no maintenance required. Brushless DC motor for quiet and reliable long life. Variable speed from 950 to 1300rpm, orbit 1mm. Orbis plus with timer 1 to 180 minutes.
Low Voltage for added safetey. Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 Hz |  |
| Cat.# | Description | Price [USD] |
| L070 | Microplate shaker | 395.00 |
| L071 | Microplate shaker with timer | 495.00 |
| L070-A | Tray for 40x1,5/2,0ml tubes | 71.60 |
| L070-D | Lid, clear Styrene | 52.85 |
| Personal Microplate Incubator |
The personal microplate incubator for reliable efficient and long life operation. Minimal footprint, dimensions 120x180x100mm (WxDxH).The use of unique design and advanced electronic temerature control circuitry guarantees an outstanding stable and accurate performance combined with quiet and long operating life.Temperature range 5°C above RT to 45°C, build in timer, accomodates all styles of microplates. minumum evaporation loses with uncovered plates, no maintenance required.
Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, weight 920g. |  |
| Cat.# | Description | Price [USD] |
| L078 | Microplate incubator | 698.00 |
| Microtiter plate-/ Multi-Well-Plate-/ Microcentrifugetube-Shaker |
The shaker provides rotary shaking action with 50 - 1.250 r.p.m / 4mm amplitude. It is useful for all application like gentle shaking for cultures and strong shaking for tubes and MTP`s. The Shaker is microprocessor controlled and has a constant speed also at high frequency. More important for many applications is the gentle starting of the shaking process, which avoids a strong disturbing or squirt out of the sample at the start of the shaking action.
the display shows set and real speed
weight 4,7kg, dimension 240 x 250 x 175mm (L x W x H)
all come inclusive platforms, trays optional |  |
| Cat.# | Description | | Price [USD] |
| L027 | Shaker for | 4 MTP`s | 1,186.55 |
| L028 | Shaker for | 8 MTP`s | 1,286.55 |
| L029 | Shaker for | 4 Multi-Well Plates | 1,186.55 |
| L030 | Shaker for | 4 x 20 1,5ml tubes | 1,186.55 |
| L030-0.5 | Trays für 0,5ml Tubes | 5 pc | 85.08 |
| L030-1.5 | Trays für 1,5ml Tubes | 5 pc | 85.08 |
| L030-2.0 | Trays für 2,0ml Tubes | 5 pc | 85.08 |
| Mini 3D shaker |
A small 3D shaker - stainless steel housing, speed can be set stepless from 15 - 60 rpm, shaking angel 7°, optional platform for 26 tubes available
dimension: 160 x 150 x 160mm
loading capacity: 500g, platform size: 200 x 200mm
weight: 1,2 kg, power: 12Volt, 300mA |  |
| Cat. # | Decription | Anschluß | Price [USD] |
| L040 | 3D-Shaker | 220Volt/50Hz | 345.00 |
| L040-A | Tube Adapter | | 49.00 |
| Multi Dancer, the Multi-Talent |
an ideal shaker for agar-plating techniques
reciprok-Shaking 0-360°, 30° increments, 0-250 sec timer
3D-Shaking 0-360°
Vortexing 0 - 6°, 1° increments, 0 - 5 sec-timer
speed 5 - 30 rpm, rocking angel 7°
progarmmable cycles with up to 125 repeats
max. loading capacity 1kg |  |
| Cat. # | Decription | Power | Price [USD] |
| L045-N | Multi Dancer | 12Volt, 500mA | 695.85 |
| MINI-Rocker |
A small rocker with variable shaking frequency from 7,5 - 30 r.p.m /min
rocking angel of 7°
the MINI-Rocker is equipped with a 0 - 24 hour timer and LED display.
dimension: 200 x 250 x 130 mm weight: 2,1kg
platform 200 x 200 mm, loading max. 500g
external power supply: 12 Volt, 500mA |  |
| Cat. # | Decription | Power | Price [USD] |
| L024 | MINI-Rocker | 12Volt, 500mA | 475.55 |
| MIDI-Rocker |
A middle sized rocker with variable shaking frequency from 1 - 50 rpm /min
rocking angel of 12°
Orbitalshaker with 1 - 200 rpm
Specifications: equipped with a 1 - 9999 minute timer and LED display
optional available with a second platform
dimension: 260 x 310 x 130 mm, weight: around 7,0 kg
platform 260 x 260 mm with anti-slip-mat, loading max. 15 kg
power supply: 115 Volt, 50-60 Hz |  |
| Cat. # | Decription | Power | Price [USD] |
| L026 | MIDI-Rocker | 230 V/ 50Hz | 910§$00 |
| L026-OS | Orbitalshaker | 230 V/ 50Hz | 945§$00 |
| L026-P | second platform | | 259§$00 |
| Maxi Rocker |
A shaker in compact design with a smooth running, strong motor; platform with anti-slip mat. The shaker is very useful for cold rooms and rooms with high humidity
dimension 300 x 300 mm, rocking angel 5,5° ( on request with 4,5 or 7,5° )
variable speed of 12 - 50 rpm
loading capacity 5 kg
operating temperature from -5°C bis 60°C, maximum humidity 95%
weight 7 kg, Dimensionen: 335 x335 x 190 mm |  |
| Cat. # | Decription | power | Price [USD] |
| L047 | Maxi-Rocker | 220Volt/50Hz | 1,485.30 |
| Test Tube Rotator, variable speed |
The Test Tube Rotator provides diffusion, dialysis, extraction or mixing.
The electronic controlled stepper motor provides speed from 5 - 50 rpm and a timer set up of 0-99 hrs, 1-59 min. The Test Tube Rotator is easy to handle through "Memory-" and "Restart"-functiones and exchangable discs for tubes from 4 - 40 mm. Angel of rotation can be set from 27° - 90°; adapters allows the simultaneous run of 2 or 3 discs.
Specification: dimensions: 200 x 200 x 250 mm (LxWxH); weight.: 3,5 kg; Motor 220 Volt, 50 Hz |  |
| Cat. # | Description | quantity x tube Ø | Price [USD] |
| L009 | Var.Rotator | | 859.00 |
| L009-4 | disc (0,5ml) | 40 x 4 - 9mm | 136.90 |
| L009-6 | disc | 30 x 6 - 9mm | 136.90 |
| L009-9 | disc (1,5/2,0ml) | 20 x 9-12mm | 114.20 |
| L009-12 | disc (15ml) | 20 x 12-16mm | 114.20 |
| L009-16 | disc | 20 x 16-19mm | 114.20 |
| L009-19 | disc | 18 x 19-22mm | 114.20 |
| L009-22 | disc | 15 x 22-25mm | 114.20 |
| L009-25 | disc (50ml) | 12 x 25-28mm | 114.20 |
| L009-28 | disc | 10 x 28-32mm | 114.20 |
| L009-32 | disc | 10 x 32-40mm | 114.20 |
| L009-A | adapter | 1 | 114.20 |
| Test Tube Rotator |
For mixing, diffusion , dialysing, hybridisation etc.
A synchronous motor with slow rotation speed of 10 rpm, which permits tube exchange while operating.
The rotating disc can be set continously at an angle between 90 and 27°. The disc has a diameter of
200 mm and has chemical resistant clamps.
The instrument has a weight of 4 kg, dimension is 200 x200 x 205 mm (l x w x h)
For ordering discs please use discs from L009! |  |
| Cat. # | Description | Quantity x tube Ø | Price [USD] |
| L004 | Rotator | 220Volt,50Hz | 425.00 |
| Mini - Rotator, Standard |
This is a place saving mixer fore 22 microcentrifuge tubes or 22 x 15ml tubes with max. 15mm diameter.
Specification Standard Rotator: speed 5 – 30 rpm, maximum continous operation time are 8 hours, digital timer, LED display
weight: 1,0kg, dimension: 310 x 110 x 175 mm
delivered: rotator with standard platform |  |
| Cat. # | Description | Power | Price [USD] |
| L053 | Mini Rotator standard | 12 Volt/ 500mA | 446.00 |
| L053-16 | platform for 4 tubes up to 30mm Ø / 12 tubes up to 15mm Ø | | 52.00 |
| Mini – Multi-Rotator |
This is a place saving mixer for 22 x 1,5/2,0 ml microcentrifuge tubes or 22 x 15 ml tubes up to max. 15 mm Ø..
Specification Standard Rotator:
specification Multi-Rotator: functiones: rotation, vortexing 0-5°, reciprocal overheadmixing 15 - 90°,
speed; 5 – 60 rpm
continous run by 24 hour timer
weight: 1,6kg, dimension 310 x 110 x 175mm |  |
| Cat. # | Description | Power | Price [USD] |
| L054-N | Mini – Multi-Rotator | 12 Volt/ 500mA | 645.00 |
| L054-4/12 | platform for 4x50/12x1,5-2,0-15ml | | 52.00 |
| Orbital Shaker |
a compact orbital shaker with simple interchangable platforms for flasks and plates.
Shaking speed 50 - 250 rpm with digital display and timer 1-24 hours.
Amplitude 20 mm, maximum loading capacity 2,5 kg
working temperature: 4 - 45°C, non condensing
weight: 2,2 kg, dimension 220 x 190 x 70 mm |  |
| Cat. # | description | | Platform size | Price [USD] |
| L044 | Orbital Shaker | 12Volt,800mA | | 735.00 |
| L044-F | universal bottle platform | with 3 adjustable bars | 270 x 195mm | 147.90 |
| L044-F/6 | platform for | 6 x 250 - 300ml | 250 x 190mm | 147.90 |
| L044-F/12 | platform for | 12 x 100 - 150ml | 250 x 190mm | 147.90 |
| L044-P | platform for | petridishes etc. | 220 x 220mm | 49.10 |
| Orbitalshaker - MULTI-POWER |
The Orbital shaker MULTI-POWER is an ideal instrument for intensive mixing of biological suspensiones or chemical componentes in bigger volumina with a total capacity of 15 kg. The shaker can be used continously during several days for extractiones, tissue cultures, rotation of closed flasks for dialysis Dialyse.
userfriendly processor controlled program, LCD-Display
3-fold Modus: orbital, reziprocal-orbital, vibration
Specificationes: Shaking speed 5 - 250 rpm
digitale display and timer 1min-96 hours.
Amplitude 20 mm, maxium load up 15,0 kg
large platform withfixation rols 460 x 400 mm
working temperature: 4 - 45°C, no wetrooms
weight: 19,3kg, dimension 485 x 520 x 140 mm |  |
| Cat. # | Description | | Price [USD] |
| L048-N | Orbitalschüttler | AC 12 V, 830mA | 2,695.85 |
| L048-P | Plattform with Anti-slip-mat | 430 x 380 mm | 167.30 |
| Rock´N Roller |
The Rock´N Roller keeps samples in gental motion by rocking while rolling.
14 stainless steel rotating bars guarantee an even mixing of samples. The 14 rolls, size 208 x 10 mm(L x Ø) are moved with 10 rpm, rocking frequency is 5 cycles /minute at 35° movement.
Weight: 3 kg, dimensions: 330 x 300 x 190mm (L x W x H)
L005-V has a variable roll- and rocking speed, which is controled by an external motor : 5 - 25 rpm; 2,5 -12,5 cycles/min
L005-SL is a roller with 6 excentrical diagonal moving PVC-rolls, useful for bottles up to 1000 ml, constant rolling speed: circa 50 rpm The soft rocking causes a very care mixing, useful for blood, cell suspensions, chemical based fluids like colors, cosmetics, oils etc..
Spezifikation: lenght of rolls 26mm, overall dimension: 380 x 270 x 100 mm (L x W x H) |  |
| Cat. # | Description | Power | Price [USD] |
| L005 | Rock´N Roller | 220V, 50hz | 830.50 |
| L005-V | Rock´N Roller, variabel | 220V, 50hz | 1,150.37 |
| Rotary Mixer |
The Rotary Mixer provides serial rotation of test tubes with a diameter range from 4 - 27mm. The mixer has a stepless controllable motor with a speed of 5-50 rpm. All parts are from aluminium or stainless steal construction. The drums and bars are easy to exchange. The digital read out shows speed and time from 1-99 hrs, 1-59 min.. Easy handling is provided through "Memory-", "Restart-" und "autostop"-functions.
Weight 3,3kg, dimensions 450 x 170 x 190mm(L x W x H), power 220volt/50Hz |  |
| Cat. # | Description | Quantity x tubeØ | Price [USD] |
| L010 | Rotary-Mixer | | 945.77 |
| L010-16 | bar | 20 x 16-20mm | 161.50 |
| L010-19 | bar | 18 x 19-22mm | 161.50 |
| L010-22 | bar | 18 x 22-27mm | 161.50 |
| L010-4 | drum | 104 x 4 - 6mm | 499.00 |
| L010-6 | drum | 104 x 6 - 9mm | 499.00 |
| L010-9 | drum | 104 x 9-12mm | 499.00 |
| L010-12 | drum | 48 x 12-16mm | 296.50 |
| L010-912 | drum | 56 x 9-12mm | 334.00 |
| Programmable Overhead Mixer "Multi-Mix" |
The overhead mixer "Multi-Mix" is a quiet and reliable microprocessor controled unit for stirring up to 20 liters. "Multi-Mix" is usable up to seven days continously. Three types of motion, standard , reciprocal and vibration, garant a strong mixing of fluids up to the medium viscosity area. "Multi-Mix" is an ideal equipment for laboratrories in biotechnology, analytic and chemical synthesis. Powered by an external 12 V/800 mA AC/Adapter it is safe and economical. The combination of three motion types provides a high level of homogenicity due to combinatiobn of laminar and turbulent flows, which causes faster dissolving of substances.
 Specificationes:speed regulation range 40 - 1000 rpm
Timer for reciprocal motion 0- 250 seconds
Timer for vibration 0-5 secunds
General-Timer 1 min - 96 hours
dimensions 135 x 400 x 250 mm
weight 2,5 kg
power: 12 V/800 mA AC/Adapter |  |
| Cat. # | Description | | Price [USD] |
| L085 | Multi-Mix | | 1,136.85 |
| L085-1 | Paddel stirrer | 70 x 70 mm | 55.77 |
| L085-2 | Propeller stirrer 2-blades | 60 mm diameter | 55.77 |
| L085-3 | Propeller stirrer 3-blades | 50 mm diameter | 55.77 |
| L085-4 | Anchor stirrer | D= 90 mm, 48 mm Höhe | 55.77 |
| L085-5 | Centrifugal stirrer | 50 mm diameter | 55.77 |
| High Speed Vortexer für Tubes |
This flexible unit was designed, to fulfill the increasing inquirements regarding mixing of samples. The Vortexer can be used in a variety of applications as general microtube mixing, mixing of e. g. suspensions of cells and microorganisms, chemicas and espcialy when high speed vortexing is needed in DNA/RNA preparation steps in microcentrifuge or falcon tubes. For the preparation of sequencing steps is often high speed vortexing needed, which can be done with this vortexer up to 3,500 rpm.
Shaking speed: 400 - 3,500 rpm, amplitude: 3 mm
Timer 0- 60 minutes or non stopp ( maximum 8 hrs)
Dimension: 145 x 170 x 180 mm, weight: 2,9 kg
supply: vortexer without platform, please order platform separately |  |
| Cat. # | Description | Price [USD] |
| L087 | High Speed Vortexer, power supply AC 12 Volt, 830 mA | 588.00 |
| L087-32 | platform for 16 x 1,5 ml - 8 x x0,5 ml - 8 x 0,2 ml tubes | 28.50 |
| L087-8/15 | platform for 8 x 15 ml tubes, D = 16 mm | 28.50 |
| L087-4/50 | platform für 4 x 50 ml tubes, D = 30 mm | 28.50 |
| L087-10/10 | platform für 10 x 10 ml tubes, D = 12 mm | 28.50 |
| Power-Mix |
"Power Mix" is an universal vortex mixer for test tubes from 7 to 35 mmØ. The instrument can be used in "Press-to-mix" action or continously. The stepless speed can be controlled up to 2.500. By using further additional accessories 96 well plates can be mixed as well as 20 x 1,5 ml centrifuge tubes at same time.
Specification: weight 3,2 kg, dimensions: 135x120x135 mm (L x W x H) |  |
| Cat. # | Description | Price [USD] |
| L002 | Power Mix | 385.00 |
| L002-MTP | micro-titre-plate-holder f. 1 x96 plate | 69.85 |
| L002-MRT | mini-reaction-tube holder f. 20 tubes | 85.65 |
| L002-1TTH | one position test tube holder | 65.91 |
| L002-2TTH | multi position tube holder f. 7 tubes | 127.14 |
| L002-UKP | universal contact plate | 40.53 |
| MINI-Vortex |
A space saving instrument to mix small samples in tubes from 1,5 to 50 ml. The MINI-Vortex can be used continuesly or in the press-to-mix mode. Speed can be setted variable from 300 to 2.500 rpm
Size: 140 x 85 x 70 mm
Weight: 0,8 kg
external Powersupply: 12 Volt/300 mA |  |
| Cat. # | Description | Power | Price [USD] |
| L023 | MINI-Vortex | 12Volt/300mA | 225.80 |
| Tube Vortexer |
A very economical priced equipment for mixing 0,2 - 0,5 -1,5/2,0 ml microcentrifugentubes,e.g for vortexing of bacteria/yeast cultures and for DNA/RNA purification.
Spezifikation: capacity 9 x 0,2 ml - 8 x 0,5 ml - 16 x 1,5/2,0 ml
speed variabel 250 - 3,000 rpm, amplitude 2 mm
dimension / weight 120 x 180 x 100mm / 1,5 kg |  |
| Cat. # | Desciption | Power | Price [USD] |
| L055 | Tube Vortexer | 220Volt, 50Hz | 356.07 |
| Magnetic Stirrers and Hotplate Magnetic Stirrers |
electronical speed controlle, speed range from 50 bis 1.250 rpm, double housing of aluminium and thermovacuum formed plastic, coated with electrostaticly applied powder, which is corrosion resistant; stirring capacity 5 or 20 liter
Specification: weight 2,2 kg, dimension 172 x 286 x 80 mm(L x W x H)
stainless steel 155 mm ø
Magnetic stirrer with Aluminium-hotplate for stirring and heating at same time or indpendant.
Temperature range is 50 - 325°C at 600 Watt,
speed range 50 - 1.250 rpm Mixing/heating on 145mm plate of volumina up to 5/ 10/ 20 liters .
The aluminium housing is equipped with M10 threated support rod connection. Working temperature is 5-50°C, allowed humidity is 90%
Specification: weight 2,8 kg, dimension 172 x 286 x 125 mm (L x W x H) |  |
| Cat. # | Description | motor rating in/out | Price [USD] |
| L012-5 | Magnetic Stirrer 5 Liter | 22 / 2,2 watt | 295.30 |
| L012-20 | Magnetic Stirrer 20 Liter | 13 / 5 watt | 450.90 |
| | | | |
| L014-5 | Hotplate/Magnetic Stirrer 5 L | 22 / 2,2 watt | 450.70 |
| L014-10 | Hotplate/Magnetic Stirrer105 L | 22 / 2,2 watt | 550.45 |
| L014-20 | Hotplate/Magnetic Stirrer 20 L | 22 / 5 watt | 625.60 |
| Mini-Magnetic Stirrer |
A small motor driven magnetic stirrer in a stainless steel housing with enough mixing power for many applications in the lab. Stepless speed regulation from 150 - 3000 rpm
dimension: 120 x 150 x 65 mm
dimension plate: 110 x110 mm
mixing capacity: 2 liter
weight: 1 kg
external powersupply: 12Volt, 300 mA |  |
| Cat. # | description | Electrical requirement | Price [USD] |
| L025 | MINI-magnetic stirrer | 12Volt, 300mA | 232.40 |
| Multi Position Magnetic Stirrers |
All possibilities in one microprocessor controlled productline, all positiones individual to control:
with or without heating
4 or 6 positions - square or bench form
hotplates made from 120mm stainless steel
speed range 50 – 1200 rpm, energy 10 – 300 Watt/ Position |  |
| Cat.# | Configuration | Hotplate | dimension | weight kg | Price [USD] |
| L060 | 4-Position,bench form | no | 545 x 245 x 110 | 7,2 | 1,190.00 |
| L061 | 6-Position,bench form | no | 830 x 245 x 110 | 10 | 1,282.40 |
| L062 | 4-Position, square | no | 335 x 400 x 110 | 7 | 1,190.00 |
| L063 | 6-Position, quare | no | 500 x 400 x 110 | 9,8 | 1,282.40 |
| L064 | 4-Position,bench form | yes | 545 x 245 x 155 | 9,2 | 1,939.55 |
| L065 | 6-Position,bench form | yes | 830 x 245 x 155 | 13,2 | 1,326.00 |
| L066 | 4-Position, square | yes | 335 x 400 x 155 | 9,4 | 1,939.55 |
| L067 | 6-Position, square | yes | 500 x 400 x 155 | 13 | 1,326.00 |
|
Top of Page